Specifications

Protocol Default
Port Default Transport Notes
(Stream 1) random SSM) static group address may also
be configured.
Multicast Video
RTP/RTCP
(Stream 2)
18890/18891
UDP Multicast
(group address
random SSM)
Only if video stream 2 is set
up for Multicast transport. A
static group address may also
be configured.
CAMERA PROTOCOL SUPPORT
The SW720-H264-SD camera supports COHU, Pelco D, WTI, NTCIP, Web/ONVIF and
other protocols through the RS-485 data connections. The RS-485 serial port can be
configured using the On Screen Menu system or by using the WTI Camera Control GUI
program through the Ethernet connection.
The various protocols can also be accessed through the use of different port numbers
when sending camera control commands to the Sidewinder using an Ethernet connection.
COHU Protocol: 55002
Pelco D Protocol: 55001
WTI Protocol: 53935
NTCIP Protocol: 55000
Web/ONVIF Protocol: 55003
As long as they are not used simultaneously, it is possible to use multiple different
protocols from different control stations when using the Ethernet protocol support. For
example, if COHU protocol is being used locally on the RS-485 serial data port, it is
possible to use NTCIP protocol over the Ethernet from the head end monitoring center to
control the camera on port 55000.
SW720-H.264-HD WTI ~ Page 25 of 31