Specifications

SW720-H.264-HD WTI ~ Page 31 of 31
Water Immersion Immunity IPx7 - IEC 60529 section 14.2.7 using an immersion depth
of 1 meter measured at the bottom of the camera and a
duration of 30 minutes.
Icing Immunity NEMA 250-2003 section 5.6.
Corrosion Immunity NEMA 250-2003 section 5.10 and the procedure specified
in ASTM-B117 Marine.
EMI Radiation Within the limits set by FCC Regulations 47 CFR Part 15
for Class A devices.
MECHANICAL
Dimensions 12.6”L x 11.3”H x 9.25”W (32cm x 29cm x 20cm)
Weight 14.6 lbs. (6.64 kg.)
Construction White powder coated aluminum and Kydex 550 with all
stainless steel hardware
REVISION HISTORY
01/15 – Update: Video Encoding Section
Added: IP66/IP 67 Broken Seal Warning
12/14 – Changed logo
11/14 – Add: Additional mounting options
6/14 – Added: Specification section at end of document, multiple model numbers to title
page, model feature matrix, AMP connector pin outs, RJ-45 Breakout Box, 24VAC
wiring diagrams, Ethernet address and port data.
11/13 – Analog video and RS-485 signal wiring in MS umbilical connector wiring chart
changed to standard, rather than optional. Mechanical dimensions drawing modified to
show umbilical connector with standard 3 foot length, rather than AC Plug and RJ-45
Connector.