Reference Manual

Figure 12: Test page
10.5.3. Accessing the web site in access point mode
To configure the radio module as access point we use the command:
AT+wlansetmode=AP
OK
In factory state the SSID of the radio module is "calypso" prepended by its
MAC, the password is "calypsowlan" and the domain is "calypso.net".
Furthermore, we like to use an own SSID "mySSID" and a new password "mypassword" to
access the wireless network. Therefore type:
AT+wlanset=AP, SSID , mySSID
OK
AT+wlanset=AP, password , mypassword
OK
Next, we would like to use our own domain "mywebpage.net":
AT+NetAppSet=DEVICE,DOMAIN, mywebpage . net
OK
Finally restart the network processor:
AT+stop =0
OK
AT+ s t a r t
+eventnetapp : ipv4_acquired , 1 0.12 3.45 .1 ,10 . 123 . 45.1 , 0 .0. 0 .0
OK
Now connect with your PC or smart phone to the WLAN of the Calypso radio module and
call the website "mywebpage.net/mytest.html" using a browser.
Calypso reference manual version 1.2 © April 2019
www.we-online.com/wireless-connectivity 87