Users Manual

S35 Quick Start Guide S35 Quick Start Guide
NOTICE FOR USE
Thermal imagers shall not be pointed to high-strength energy
sources (including the Sun, laser transmitting equipments and
their reection sources), which otherwise will have a negative
inuence on its accuracy and damage or permanently damage
infrared detector of it.
It's recommended to take out the battery and store it in a dry
and well ventilated environment if the thermal imager is not
going to be used for a long time.
Human eyes shall not be irradiated by the laser designator of
the thermal imager.
When installing the batteries, you must pay attention to the
positive and negative position of the battery cover.
Our company shall not bear any legal responsibility for any
mistake and accident caused by own reasons or reasons of any
third party in the course of using this product by the user or
property loss and personal injury caused by misjudgment against
images.
We prepare this guide with the purpose of facilitating users to use
and understand our products. We will try our best to ensure the
accuracy of contents of this guide, but we still cannot ensure the
completeness of contents of it. Since we have been continuously
updating and upgrading our products, we reserve the right to
modify this guide at any time without prior notice.
UP BUTTON
· ZOOM-IN: When power is on and the menu is not called out,
click in turn to trigger normal recycle switching for 2X/4X zoom-
in.
· 2X : / 4X : Zoom-in icons are not displayed in normal
state.
· Up: When power is on and in the menu is called out, clicks the
menu bar to move the option up by one item.
POWER BUTTON
· POWER ON: Long press the power button to start the thermal
imager, and a startup image is displayed in the eyepiece.
· POWER-OFF:
· MANUAL POWER-OFF: Long press the power button for
display of power-off progress bar until the completion of the
progress bar and the thermal imager is powered off.
· CANCEL POWER-OFF: Releasing the power button before the
completion of progress bar to cancel the power-off.
· AUTO POWER-OFF: Time for auto power-off is settable, and
if no button operation is carried out within such time, the thermal
imager will be powered off after the completion of the power-off
progress bar.
ATTENTION: When “none” is selected for auto power-off time, the
thermal imager will not be powered off automatically.
· COMPENSATION: Short press the power on/off button
when power is on and the menu is not called out, to complete
the corresponding compensation actions (except the automatic
compensation).
DOWN BUTTON
· PSEUDO-COLOR MODES: When power is on and the menu is
not called out, click in turn to switch four pseudo-color modes of
white heat, black heat, red heat, green heat.
· WHITE HEAT : Objects at relatively high temperature are
displayed to be white or light grey;
· BLACK HEAT : Objects at relatively high temperature are
displayed to be black or dark grey;
· RED HEAT : Objects at relatively high temperature are
displayed to be red;
· GREEN HEAT : Objects at relatively high temperature are
displayed to be green;
· DOWN: When power is on and the menu is called out, clicks the
menu bar to move the option down by one item.