User manual
User Manual
11
Press to enter Manual mode and to adjust Tmin and Tmax manually.
Press to increase the Tmax value, press to decrease the value, press to switch to Tmin
adjustment mode.
The same operation for Tmin adjustment.
Press to enter Auto mode and Tmin and Tmax will adjust automatically according to the change of
scenery.
Reviewing and Deleting Stored Images
To view stored images on the SD card:
Press to activate the menu.
Press the softkey labeled “File” to reveal the review menu “Filelist”.
Press the softkey labeled “OK” to enter the file list.
Press the softkey labeled “←” and “→” to toggle between different images, and press the softkey labeled “Select” to
choose the selected image.
To delete a single image from the SD card
Perform the steps under viewing stored images above to bring the desired image to the display.
Press the softkey labeled “Delete”
Press the softkey labeled “Yes”.
To delete all the images from the SD card
Press to activate the menu.
Press the softkey labeled “File”.
Select “Del All” by pressing softkey labeled “↑” and “↓”, and “OK” to confirm.
Press the softkey labeled “Yes”.
Listening to Voice Annotation
To play the voice annotation already stored with an image on the UFlash or SD card:
Perform the steps in the “Reviewing and Deleting Stored Images” section to bring the desired image to the
EASIR-0’s display.
Press the softkey labeled “Voice”.
Press the softkey labeled “Play”
The saved voice annotation will be replayed through the imager’s speaker.