User's Manual

N3105 ‘s usermanual
第 46 页
Select multi-slide insert new slide ;
D) Send message
Before sending message, you must input the number of message center. This step needs to be set only one
time. The setting can be seen in 8.1.9.2.
When the message is transmitting, the phone will prompt “ sending to…”; if sending is failed, the phone will
prompt “sending is failed!”
If sending is successful, the phone will prompt “ sending is successful! “ the message will be added into
outgoing messages.
8.1.2 Receive message
When receiving a message, the phone will give a prompt sound ( it can be set, seen in 4.2.2) then the
message will be added in inbox. The screen will display an icon of small envelope to prompt there is a
message you have not read yet (seen in 1.3). The message will be saved automatically in the memory or SIM
card (the setting is seen in 8.1.9). The maximum number of messages to be saved (including those to be sent)
is dependent on the volume of the phone and SIM card.
8.1.3 Read message
All received messages(including messages and WAP PUSH information) are stored in inbox. There is
an icon before each message to show the status of this message. Opened envelope indicates the message has
been read; on the contrary, unopened envelope shows that has not been read. The location where the message
is stored is also indicated by the icon. An icon with SIM card mark indicates the message is stored in SIM
card; or else it is stored in the phone.
Read sms storage in phone Read sms storage in SIM
Unread sms storage in phone Unread sms storage in SIM
Read WAPPUSH Read MMS
Unread WAPPUSH Unread MMS
A) Read SMS
Select the message to read, and press Option to activate option
Select Read to read the message or press OK directly
Select Reply to replySMS,MMSor make call to the addresser..
Select Forward to edit present message in text edit window and forward it to the desired number;
related operation is seen in 8.1.1
Select Save number to access number saving window and save the sender’s number.
Select Move to my folder to transfer the message to my favorite in order to use it again. Related
operation is seen in 8.1.7.（unread message can not be moved ）
Select Delete to delete present message and return to inbox.
Select Multi-delete to access name selection window, press “up” and “down” key to select the desired
record, press OK and select to delete many items.
Select Delete all to delete all messages in intbox.
Select Sort to arrange messages in sequence according to time or type.