User's Manual

N3105 ‘s usermanual
第 59 页
To make alarm on, the confirmation on the correctness of alarm time is needed. For example, if the required
alarm time is 0:00, you may select the option time in the alarm display box to enter the time box, and then
enter the required time value by digit keys.
The foresaid alarm works only for one time except that the alarm period is set and confirmed on its
correctness. For other settings, select from four different modes the period needed after enter the option
period:
Once： the alarm works only for one time subject to the setting and then will be off.
Daily：the alarm works at the same set time everyday subject to the setting.
Day of the week：the alarm works on some day or days of week;
Then select Ring to set up the alarm tune.
Snooze
： to set the alarm to ring 5 times every 5 minutes;
The last, select the option Status menu to set the alarm on or off.
12.2.2 Alarming
When it is up to the set alarming time, the cell phone will play the alarm prompt sound (if the
setting allows ) and show on the screen the alarm prompt picture.
In the event that cell phone is power off, the alarm will still work and may be stopped by any key.
It is noted that the alarming will still work per previous time setting even the date and time of cell phone
are readjusted. Therefore, the next alarming date and time shall be re-determined subject to the changed date
and time in the cell phone.
12.3 Scheduler
12.3.1 Function description
Under the personal information management box, the following four functions are available: calendar,
task arrangement, schedule list and capacity inquiry.
Within calendar，user may read &check information for current month, specify the date for check
&reading, and perform management on event, including: add to &delete recorded event, change the prompt
content as well as the date and time correspond to recorded event.
Under task arrangement, sixty events may be recorded.
The capacity inquiry provided in personal information management is for user’s purpose to check the
total/available space for recorded event &task arrangement.
12.3.2 Select date
Using this function, select any day (within valid time limit) and complete other functions.
After the first access, the current date is shown; upon the selection of any other day, the calendar
returned to by pressing the key confirmation displays that calendar the date selected belongs to.