User's Manual

User Manual for NEC N5105
第 页
21
The input methods built-in the microphone include as follows:
- Chinese spelling input law
- Chinese stroke input law
- Intelligent English small letter input law
- Intelligent English capitalization input law
- English small letter input law
- English capitalization input law
- Number input law
If you want to choose the appropriate input method, please press：* key.
- Symbol input law
If you switch the symbol input law, please press：# key.
The corresponding icon to input law is showed on the lower-left corner of the screen. When editing the
information, the explanation about the screen contents is showed as follows:
1.6.4 Stroke input law
The icon of stroke input law is:
Under the status of stroke input law, you may input the Chinese character according its stoke. Under this
status, each key represents the stroke as follows:
Key Corresponding stroke Key Corresponding stroke
1 Horizontal 6 ? (Omnipotence key represents any stroke) hook
2 Vertical 3 Left-falling
4 Right-falling 5 Horizontal and turning
According to the Chinese character sequence, press the corresponding number key to carry out the stroke
input. The stroke clue is showed on the lower-left corner of the screen and the candidate Chinese characters
appear in the bottom row.
You may press U key or D key to look over the candidate Chinese character across pages and use L key or R key
to find out the Chinese character you need and then press OK key to input this Chinese character.
Phrase input: after you input the Chinese character, the corresponding Chinese characters will appear on
below the screen for you to choose to make up phrase that you need.
During the input stroke, you may press 6key to input “?” for replacing the unknown stroke. For example,
when you want to input “好”, but don’t know how to input the first stroke “ㄑ”, you may press 6key for
replacing it. At this time, the interrogation mark will appear as the stroke clue. Then you can press the
corresponding number key 3 （left-falling）, 1 （horizontal）, 5 （horizontal and turning）to the residual
strokes according to the stroke sequence. You will see the Chinese character “好” appear in the candidate
Chinese characters area. Press the OK key for confirmation and finish the input.