User's Manual

User Manual for NEC N5105
第 页
31
4 Setting
4.1 Phone
The setup on mobile phone, which includes such as time and date, language, auto lock, and my menu, is for
the service situation.
4.1.1 Date & Time
For the time, date, and corresponding forms of setup, use the key of U or D to select the content, press the
key of Select to confirm the content needing to change.
Time ： All you input the correct time with 12/24 hours
Format
： Adjust the format to show the time.
Date
： All you input the correct date.
Format
： Set up the format to show the date.
4.1.2 Language
There are two selections such as Chinese simplified character and English. While setting up, use the key of
U or D to select the content, press Select or OK to confirm the content needing to change, and press Back to
delete the selected content.
4.1.3 USB Mode
Modem mode
： Enable Modem mode, and then the system can be used for data synchronization and
modem.。
U-disk mode： If you enable the U-disk mode, you phone can be used as a U-disk. However, once you
enable this mode, synchronization and modem are disabled.
Note： after switching mode, the system will auto-restart. The new mode can take effect after restart (See
system pop-up)
Using Modem mode, you need installing driver. You can only switch to U-disk mode (Modem
mode not included) on a computer that hasn’t install driver.
4.1.4 Touch-sensitive wheel set up
Touch-sensitive wheel is a feature of the phone, by sliding on it you can select menu,options. Etc. Here
you can choose to adjust its speed or disable this feature.
4.1.5 Side key lock
Switch on the lock to side key and MP3 controller to avoid pressing keys by accident with mistaking
operations. On/off :set the auto lock on or off.
4.1.6 My Menu
To enter the window of My Menu, activate the key of Option, select Insert the Menu before to insert
the new menu before the currently selected menu, and enter the window of prepared list. Select the inserted
menu, press the key of Select or OK to insert the menu, select Replace, and use another menu to replace the
currently selected one, and the operation is the same as Insert the Manu. Delete: delete all selected manus;
Delete All: delete all manus.