User's Manual

N3306 User manual
第 32 页
Manual ： Your mobile phone will scan for available network and provide you with the list of current
network. You can select the preferred network, and the phone will prompt such information as successful or
failed during the connection with network.
Preferred network
： to view the name and ID of current network, tap Back to previous menu；
GPRS attach ： to choose between “Always attach” and “Attach when using”。
4.7 My menu
To enter the window of My menu, and tap Option：Replace，list the spare items（9 items most），
select the item portended to add in My menu, tap Select or press camera key to confirm adding（Only
Create is available when My menu is empty.）；after adding，tap Option to Insert before insert before the
item selected；Insert after insert after the item selected；Replace：replace the current item to another
one；Delete：delete the item selected；Delete all：delete all items。
4.8 Connection profile
To set the connection method to visit network, activate Option:
Save as ： to save the changed connection setting of network as other setting. The system
setting will not be covered, and it will prompt;
Profile
： to select the connection method to visit network among WAP, MMS and Java；
View
： to view the name, homepage and bearer type and so on of current connection；
Tap the connection of non-system setting，and then tap Edit to enter the window of
connection setting to complete the following operations：
Profile title：to view or edit the name of profile；
Homepage：to view or change the address of homepage；
Gateway ： include IP address （ for example 010.000.000.172 for CMCC）； Port
number (for example 9201 for CMCC)；Connect type：to select between HTTP
and WSP。
Bearer type：to select the bearer type of network visited, use side up/ down key to highlight
the type you wanted, tap Select to activate it：
♦ GPRS only：only use GPRS network；
♦ CSD only：only use CSD network。
GPRS settings：to change the connection setting of GPRS，select the setting needed to
change, tap Select to enter corresponding window：
♦ APN：to set the name of network；
♦ User name：user name of network service；
♦ Password：password of network service。
CSD settings：to change the connation setting of CS，select the setting needed to change,
tap Select to enter corresponding window：
♦ Dial-up number：dial-up number for network service；
♦ Call type：to set the call type between ISDN and Analogue；
♦ User name：user name of network service；
♦ Password：password of network service。
DNS settings
： input DNS address 1 and DNS address 2。