User's Manual

N3306 User manual
第 47 页
Signature
To set Signature on/off。
SMS center
f supporting this service, the number of SMS center will be provided by your network operator.
Validity period
The maximum time to store messages has 4 options: 12 hours, 1 day, 1 week and maximum.
Delivery report
The function is to confirm whether the other side has received the message. If closing it, the function is
invalid.
Storage type
The save location of messages can be selected including SIM and phone. The storage capacity of SIM
card is limited, but when phone fails, the SIM card can be installed into other phone. The storage capacity of
phone is comparatively large, but when it fails all information can not be exported.
8.11 MMS settings
Connection profile：to set the profile of connection；
Send settings：to set Validity period、Read report、Delivery report、Priority。
Validity period: to select the validity period of storing messages in MMS center among 12 hours,
1 day, 1 week and maximum;
Read report：to enable the function of read report on/off。When the function is on, the network
will inform the user whether the message is read or not;
Delivery report：Two options: ON/OFF, which requires the gateway to send the delivery report;
Priority：Three options: Low、Normal and High。
Receive settings：to set the way of receiving and replying MMS。
Auto receive: Two options: Auto and Manual, which is to receive automatically or manually;
Reply：to set whether the system reply the other side automatically。
Filter：to set a filter list, and storage the number or email of contact person which not want to receive, then
the system will not receive MMS from these address. The filter list is most 20 items (phone number
or email address). If beyond this limit, the system will prompt “List full Can’t add！”. Tap Option:
Create to add new phone number or email; (20 most)
Edit to edit the selected content;
Delete to delete the selected content.
Delete to delete all content.
Tap View to view the selected message.
8.12 Reset
To resume all original default value as the system prompt，if so, the setting of message (SMS and
MMS) will resume to original default value。
8.13 Storage status
This function displays storage status for SMS, including phone and SIM card.