Operator's Manual

P-2000/C-2000/RT-2000
Operator’s Manual
Page 11 of 39 Publication No. 150-049105
P-2000 Operators Manual Rev. A
Oct 2003
Setting the Display Brightness
When the user presses the DIM button, the display brightness adjustment display appears. When the value knob is
turned clockwise, the display brightness increases in intensity. When the value knob is turned counter clockwise,
the display brightness decreases in intensity. The Brightness display disappears when no value knob activity has
been present for more than 2 seconds.
Setting the Volume Level
When you first power on the P-2000, the volume levels for both transceivers will be reset to the level that was active
when the unit was powered down. You can change the volume level as follows.
When the user turns either of the volume knobs, the volume adjustment display will appear. When the upper
volume knob is turned, the volume adjustment display will appear on the upper half of the screen, and will adjust the
volume on FM1 transceiver. Likewise, when the lower volume knob is turned, the volume adjustment display will
appear on the lower half of the screen, and will adjust the volume on FM2 transceiver. The display below depicts
the volume adjustment display when the upper volume knob has been turned. Turning the volume knob clockwise
will increase the volume level, while turning the knob counter clockwise will decrease the volume level. The
current volume level will be displayed within the display. If the volume is turned all the way down to the off
position, the bar will turn red and the Mute indicator will be displayed on the main page.
To test the current volume level, press the volume knob and noise should be heard in the headset. The volume
adjustment display will automatically disappear if when no knob turning activity has occurred for more than 2
seconds.