Operator's Manual

P-2000/C-2000/RT-2000
Operator’s Manual
Page 19 of 39 Publication No. 150-049105
P-2000 Operators Manual Rev. A
Oct 2003
Programming/Editing a Preset Channel
The EDIT PAGE allows the operator to temporarily change properties of a preset channel. Precisely which
properties can be changed varies with channel and radio type At a minimum, all information that can be determined
by the system during the LEARN mode is displayed on this page.
While on the HOME page press the EDIT button and Programming Mode display page will be seen.
Select either of the first two options to program/edit preset channels for FM1 or FM 2 transceivers. Once a selection
has been made the display will show the Channel Properties page will be displayed as seen below:
On this page field labels are shown in white characters and data fields are in green characters. The cursor/value
knobs are used to move the cursor to the different fields and then changes and/or data entered via the value knob.
Below is a list of the data fields used on this display page:
Channel Identifier field (CHAN:) – This displays the currently selected channel, i.e. the channel you are editing.
Zone Number (Z:) – This displays which zone the preset channel is stored in.
Channel Number (C) – This displays which channel the preset channel is stored in.
ALPHA ID (ALPHA) – This field displays the alpha identifier for channel being programming.