Operator's Manual

P-2000/C-2000/RT-2000
Operator’s Manual
Page 33 of 39 Publication No. 150-049105
P-2000 Operators Manual Rev. A
Oct 2003
SYSTEM SETUP MODE
The P-2000 comes the factory already configured for a normal installation, however, there are several options the
operator can select. These options are very simple to update. The process is as follows.
• Ensure you are on the HOME PAGE and press the PROG button. If prompted, enter the password #1 (In the
system programming, the user has the option of eliminating this password by setting it to “0000”)
• Highlight the SYSTEM option and press the ENTER button. You will be prompted to enter the system
password. After successful entry of the system password the SYSTEM SETUP page will be displayed.
• On System Setup Page 1, users can configure the Label field (instead of FM1 or FM2, the user could input
VHF1, MAIN, OPS or anything that helps the operators properly select transceivers), and the passwords.
Password #1 will not appear in any operations if it set to “0000”.
• To display page 2, highlight the NEXT option and press enter.
• The second setup page allow the selection of the following