Operator's Manual

P-2000/C-2000/RT-2000
Operator’s Manual
Page 35 of 39 Publication No. 150-049105
P-2000 Operators Manual Rev. A
Oct 2003
MAINTENANCE PAGES
The following information is not normally needed by and operator. The maintenance pages are used by a technician
to make audio level adjustments and verify system operation via BITE (Built-In-Test).
• Ensure you are on the HOME PAGE and press the PROG button. If prompted, enter the password #1 (In the
system programming, the user has the option of eliminating this password by setting it to “0000”)
• Highlight the MAINTENANCE (Its located below the SYTEM option) option and press the ENTER button.
You will be prompted to enter the system password. After successful entry of the system password the
MAINTENANCE mode page will be displayed as seen below.
Selectable modes shall include Flashport firmware mode, Data mode, Service port mode, Extended protocol mode,
Digital pot adjustment mode, and Software version reporting mode.