User's Manual

Wulfsberg Electronics P-2000 and C-2000/RT-2000 Operator’s Manual
Document 150-041102 Revision A Page 28 of 37
Loading Encryption Keys
Before a transceiver will transmit encrypted messages, the user must load encryption keys into the transceiver. To
accomplish this, the user must first put the transceiver into KEY LOAD mode, and then using a Motorola KVL, load
the keys. Perform the following steps to load keys:
• From the HOME page press the PROG button. If prompted, enter the password #1 (In the system programming
options, the user has the option of eliminating this password by setting it to “0000”)
• Highlight the KEY LOAD option and press ENTER. Enter password #2 to get to the Transceiver Setup page.
• In the XCVR field, select which transceiver (FM1 or FM2) to load keys.
• Highlight the START option and press the enter button to begin the encryption load process.
• Connect the KVL loader to the data port on the front of the P-2000 (or RT-2000, not the C-2000). Load keys
for both FM1 and FM2 if desired. The keyloader will indicate successful loading.
• Press the HOME button several times to return to the HOME page.