User's Manual

P-2000/C-2000/RT-2000
OPERATOR’S MANUAL
Page 12 of 40 Publication No. 150-049105
Operator’s Manual Rev. B
Dec 2004
Turning the System On and Off
To power-on the P-2000, press and hold the PWR button (push in the VALUE Knob) for approximately one second
and release. Several version number and copyright pages appear on the display while the unit performs a self-test
and initializes the attached radio systems. When initialization is complete, the HOME PAGE will appear on the
display. (-XX = latest software mod)
To power the P-2000 OFF, press and hold the PWR button for 3 seconds. The following message flashes on the
display several times:
Continue to hold the PWR button until the message stops flashing and the display turns off.
If aircraft power is removed while the P-2000 is in operation, the P-2000 will store the following information to
memory so that when power is re-applied the system will be at the same operating point:
1. Current active and standby channels for FM1 and FM2.
2. Current volume levels for FM1 and FM2.
If the operator releases the “PWR” button prior to 3 seconds elapsing, the display will return its previous state.