User's Manual

P-2000/C-2000/RT-2000

OPERATOR’S MANUAL

Publication No. 150-049105 Page 17 of 40

Rev. C Operators Manual

July 2005

Receiving/Transmitting

Transmitting

To transmit on a radio system, select the appropriate source on your audio panel, and key the microphone.

Transmission will begin on the radio’s currently selected Active channel. During the transmission, the radio’s

transmit indicator will light, and the channel’s transmit frequency will be displayed. The following illustration

depicts FM #1 transmitting.

Receiving

The P-2000 is constantly monitoring its radios for reception. When a signal is received, the P-2000 will light the

receive indicator for the receiving radio, and route the audio to the operator’s headset (Assuming the associated

intercom switch is selected). The following illustration depicts FM #2 receiving.

Enabling/Disabling Transceivers

Transceivers cannot be individually powered off on the P-2000, however the volume level of either transceiver can

be reduced to zero, effectively turning off the transceiver. The screen below shows what the display looks like when

the audio level of a transceiver is set to zero. Notice the mute indicator is displayed and the level indicator turns red.

RX Indicato

TX Indicato