User's Manual

P-2000/C-2000/RT-2000
OPERATOR’S MANUAL
Publication No. 150-049105 Page 37 of 40
Rev. C Operators Manual
July 2005
MAINTENANCE PAGES
The following information is not normally needed by and operator. The maintenance pages are used by a technician
to make audio level adjustments and verify system operation via BITE (Built-In-Test).
• Ensure you are on the HOME PAGE and press the PROG button.
• Highlight the MAINTENANCE (It’s located below the SYTEM option) option and press the ENTER button.
You will be prompted to enter the Password #2. After successful entry of Password #2 the MAINTENANCE
mode page will be displayed as seen below.
Selectable modes shall include Flashport firmware mode, Data mode, Service port mode, Extended protocol mode,
Digital pot adjustment mode, and Software version reporting mode.