User's Manual

P-2000/C-2000/RT-2000
OPERATOR’S MANUAL
Page 38 of 40 Publication No. 150-049105
Operator’s Manual Rev. B
Dec 2004
Flashport Mode
The flashport mode is one of the mode options available on the Transceiver Maintenance page. This mode allows
the technician to upgrade the embedded software within the internal transceiver.
• Select the transceiver to perform the flash upgrade. Highlight START and press enter to begin. Perform the
flash upgrade.
Data mode, WED service mode and extended protocol modes are accessed using the same procedure.
Digital Pot Tuning Mode
This page allows a technician to adjust the digital pot settings on the P-2000. The cursor knob allows the selection
of the pot name field, pot value field, the back button, and the save button. Turning the value knob while the pot
name field is selected shall enumerate all the pot names: MIC IN 1, MIC IN 2, SIDETONE 1, SIDETONE 2,
HDSET OUT 1, HDSET OUT 2, SPEAKER, and ALERT TONE. Turning the value knob while the pot value field
is selected enumerates the range of values: 0-127. The display below shows the layout for this page.