User's Manual

FLITELINE AVIONICS SYSTEM
PILOT’S GUIDE
Publication No. 150-047012 Page 41
Rev. D Dec 2005
CDF-552 Controls (Series III and FliteLine Interface continued…)
1860.0
ACT
1
ANT BRGADF

190.5

The top line of the display is always the active
frequency, indicated by the letters ACT. The
number 1 or 2 below the letters ACT indicate the
ADF System Number when more than one system
is installed.
Data in the lower line of the display depends on
position of FUNCTION SELECTOR.
In ANT, ADF, or BFO mode, the bottom line of the
display indicates the standby frequency.
023°
ACT
1
ANT BRGADF

190.5

In BRG mode, the bottom line of the display
indicates the magnetic bearing of active station. In
this mode the active frequency can be tuned
directly.