User's Manual

FLEXCOMM II
C-5000 (P-25 Capable)
Operator’s Manual
Setting the Active RT
You can change the active RT by pressing the soft keys. If radio 1 does not already contain the active
RT, pressing the UPPER SOFT key will make radio 1’s active transceiver the active RT. If radio 1 already
contains the active RT, pressing the UPPER SOFT key toggles the active RT between radio 1’s Main and
Guard. The LOWER SOFT key performs the same operations for radio 2. The following sequence of
illustrations demonstrates changing the active RT using the soft keys.
The Guard transceiver of radio 2 is currently the active RT.
1 1
1 2 3
LUKEAFB T W R 1
2
. . 1 TACTICAL- 0 0 1
Pressing the UPPER SOFT key makes the Main transceiver of radio 1 the active RT.
1
1 2 3
LUKEAFB T W R 1
2 2
. . 1 TACTICAL- 0 0 1
Pressing the UPPER SOFT key again makes the Guard transceiver of radio 1 the active RT.
1
. 1 5
TACTICAL- 0 1 5
2 2
. . 1 TACTICAL- 0 0 1
Pressing the UPPER SOFT key again makes the Main transceiver of radio 1 the active RT.
1
1 2 3
LUKEAFB T W R 1
2 2
. . 1 TACTICAL- 0 0 1
Pressing the LOWER SOFT key makes the Guard transceiver of radio 2 the active RT.
1 1
1 2 3
LUKEAFB T W R 1
2
. . 1 TACTICAL- 0 0 1
Pressing the LOWER SOFT key again makes the Main transceiver of radio 2 the active RT.
1 1
1 2 3
LUKEAFB T W R 1
2
. . 1 TACTICAL- 0 0 1
Publication
No. 150-041102 Page 84 of 88
Rev E C-5000 Operators Manual