User's Manual
Table Of Contents
- 150-041102_doc
- Section Page
- Section Page
- 1. Applicability
- 2. Glossary
- 3. Introduction
- 4. Configuration Availability
- 5. Configuring the C-5000
- A. Configuring the C-5000
- 6. CPS Software Description and Programming
- A. Before You Begin
- There are (2) versions of CPS that may apply to the RT-5000 depending upon P/N as follows:
- 9. Conventional - All the aspects of any given channel are assigned to a personality numbered 1 through 255. These menus allow the user to modify the settings for the Conventional Personalities.
- Appendix A – CTCSS (PL) Tone Codes
- Appendix B – Mode 2 Operation
- Appendix C – Single Microphone Operation
- Appendix D – Equivalent Part Numbers
- Appendix D – Equivalent Part Numbers (cont’d)
FLEXCOMM II
C-5000 (P-25 Capable)
Operator’s Manual
(e) Multikey –This page controls additional items necessary for the OTAR and secure
functions to operate properly. These are necessary to allow integration of the ITM
module with the RT-5000 Flexcomm system. DO NOT make changes to these unless
instructed.
(f) Advanced – This menu allows you to modify the Advanced options that apply to the
Secure Configuration.
Publication
No. 150-041102 Page 49 of 88
Rev E C-5000 Operators Manual