Datasheet

ManualsBrandsWürth Elektronik ManualsLEDsSMD Bi Color LED 1204 Green / Red G 520nm, R 632nm

Dimensions: [mm]

1,5

0,481,0

2,0

3,2

0,6

0,60,6

0,4

Cathode Mark

Scale - 10:1

Recommended Land Pattern: [mm]

0,70,4

0,9

0,7

1,8 1,21,2

Scale - 10:1

Schematic:

Properties Test conditions Value Unit

Peak Forward Current duty/ 10 @ 1 kHz I

F Peak

40 mA

Reverse Voltage V

REV

5 V

ESD Threshold/ Human Body

Model

ESD HBM

1000 V

Absolute Maximum Ratings (Ambient Temperature 25°C):

Chip Technology AlInGaP + InGaN

Emitting Color Red & Green

Lens Type Round

Optical Properties:

Operating Temperature -40 °C up to +85 °C

Storage Temperature (in original

packaging)

-40 °C up to +85 °C; 60% RH max.

Moisture Sensitive Level MSL 3

General Information:

Würth Elektronik eiSos GmbH & Co. KG

EMC & Inductive Solutions

Max-Eyth-Str. 1

74638 Waldenburg

Germany

Tel. +49 (0) 79 42 945 - 0

www.we-online.com

eiSos@we-online.com

CREATED CHECKED GENERAL TOLERANCE PROJECTION

METHOD

KaS PLD DIN ISO 2768-1m

DESCRIPTION

WL-SBSW SMD Bi-color Side view

Waterclear

ORDER CODE

155124RG73200

SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE

1204

001.000 Valid 2016-08-12 eiPal 1/8

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH

& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety

must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Summary of content (8 pages)

PAGE 1
Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): 0,4 0,6 Properties Test conditions Peak Forward Current duty/ 10 @ 1 kHz Reverse Voltage 1 ESD Threshold/ Human Body Model 2 3 0,6 3 0,6 mA VREV 5 V VESD HBM 1000 V 0,7 0,7 Optical Properties: Chip Technology 3,2 1,8 1,5 1,2 AlInGaP + InGaN Emitting Color 0,4 0,9 0,48 Unit 40 2 1 2,0 Value IF Peak Red & Green Lens Type 1,2 Round Scale - 10:1 Schematic: General Inf
PAGE 2
Electrical & Optical Properties: Viewing Angle: Value Properties Test conditions Peak Wavelength (Red) 20 mA λPeak R 632 nm Peak Wavelength (Green) 20 mA λPeak G 520 nm Dominant Wavelength (Red) 20 mA λDom R 624 nm Dominant Wavelength (Green) 20 mA λDom G 525 nm Luminous Intensity (Red) 20 mA IV R 50 60 mcd Luminous Intensity (Green) 20 mA IV G 140 160 Forward Voltage (Red) 20 mA VF R 2 2.4 V Forward Voltage (Green) 20 mA VF G 3.3 3.9 V min. typ. max.
PAGE 3
Spectral: Forward Current vs. Forward Voltage: 35 30 100 25 Forward Current [mA] Relative Intensity [%] 80 60 40 20 15 20 10 0 400 450 500 550 600 650 700 750 Wavelength [nm] 5 0 0,0 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.
PAGE 4
Luminous Intensity vs. Forward Current: Derating Curve: 300 40 280 260 35 240 30 200 Forward Current [mA] Luminous Intensity [mcd] 220 180 160 140 120 25 20 15 100 10 80 60 5 40 20 0 0 0 0 5 10 15 20 Forward Current [mA] 25 30 www.we-online.com eiSos@we-online.com 40 35 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel.
PAGE 5
Packaging Specification - Tape and Reel: [mm] P0 D0 K0 T W3 E1 A P2 W1 close to center A E2 B0 N D W F B C Top Cover Tape A End P1 D1 T1 A0 W2 T2 Cathode Mark Feeding direction Start Carrier Tape Cover Tape No Component min.160mm Components No Component min.100mm Cover Tape min. 400mm tolerance size 155124xx73200 A0 B0 W typ. typ. +0,3/ -0,1 1,7 3,4 8,0 T T1 T2 K0 P0 P1 P2 D0 ref. max. typ. typ.
PAGE 6
Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max TC –5°C Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Ts min max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature tL Preheat Area Value Preheat Temperature Min TL 217 °C Time tL maintained above TL tL max.
PAGE 7
Cautions and Warnings: The following conditions apply to all goods within the product series of WL-SBSW of Würth Elektronik eiSos GmbH & Co. KG: • It is also recommended to return the LEDs to the original moisture proof bag and reseal the moisture proof bag again. • Certain LED surfaces consist of soft material. Pressure on the top surface has to be handeled carefully to prevent negative influence to the function and reliability of the LEDs.
PAGE 8
Important Notes 6. Product Life Cycle The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG: Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance.