Datasheet

WPMDL9500xx / 17395xx78
MagI
3
C Power Module
FDSM - Fixed Step Down Regulator Module
CAUTIONS AND WARNINGS
The following conditions apply to all goods within the product series of MagI³C of Würth Elektronik eiSos GmbH & Co. KG:
General: All recommendations according to the general technical specifications of the data-sheet have to be complied with.
The responsibility for the applicability of customer specific products and use in a particular customer design is always within the
authority of the customer. All technical specifications for standard products do also apply for customer specific products.
Residual washing varnish agents that are used during the production to clean the application might change the characteris-
tics of the body, pins or termination. The washing varnish agent could have a negative effect on the longterm function of the
product.
Direct mechanical impact to the product shall be prevented as the material of the body, pins or termination could flake or in
the worst case break. As these devices are sensitive to electrostatic discharge customer shall follow proper IC Handling Pro-
cedures.
The customer acknowledges and agrees that they are solely responsible for compliance with all legal, regulatory and safety-re-
lated requirements concerning its products, and any use of Würth Elektronik eiSos GmbH & Co. KG components in its applica-
tions, notwithstanding any applications-related information or support that may be provided by Würth Elektronik eiSos GmbH
& Co. KG. Customer represents and agrees that they have all the necessary expertise to create and implement safeguards
which anticipate dangerous consequences of failures, monitor these failures and their consequences lessen the likelihood of
failures that might cause harm and take appropriate remedial
actions. Customer will fully indemnify Würth Elektronik eiSos and
its representatives against any damages arising out of the use of any Würth Elektronik eiSos GmbH & Co. KG components in
safety-critical applications.
Product specific: Follow all instructions mentioned in the datasheet, especially:
●The solder profile has to comply with the technical reflow / or wave soldering specification, otherwise this will void the war-
ranty.
● All products are supposed to be used before the end of the period of 12 months based on the product date-code.
● Violation of the technical product specifications such as exceeding the absolute maximum ratings will void the warranty.
● It is also recommended to return the body to the original moisture proof bag and reseal the moisture proof bag again.
● ESD prevention methods need to be followed for manual handling and processing by machinery.
we-online.com
11 / 12
Würth Elektronik eiSos GmbH & Co. KG - Data Sheet - Rev 1.0