Instructions
Table Of Contents
2.1 Evaluation board in operation
2.1.1 Pin header connection
Pin no. Description
1 GND
2 SCL
3 SDA
4 Not connected
5 VOUT
6 VDD
Table 3: Pin header connection to external boards
6
4
2
1
3
5
2.1.2 Analog Output
SJ1 is assembled with a 0 Ω resistor enabling the analog voltage output. The analog output
can be read directly through the pin 6 (VOUT ) of the pin header connection.
Figure 4: Analog output resistor
By removing the 0 Ω resistor (SJ1), the analog output can be disabled.
Differential Pressure Sensor Evaluation Board, Part Nr. 25132545xxx91
User manual version 1.0 © October 2019
www.we-online.com/sensors 8