Instructions

Resistor Description
R1 VDD and VDD_IO pins are connected together
R2 Open. It should be connected if the interrupt function on INT_0 pin is necessary
R3 I
2
C enabled. CS is connected to VDD_IO
ADR I
2
C address of the sensor is 0011001b. SAO is connected to the VDD_IO
Table 3: Functionality of resistors on the evaluation board
2.1.2 Through hole connection
Through hole pin header connections
Figure 3: Through hole connection
Pleaser refer to Table 1 for the pin description of the evaluation board.
Check if necessary for your configuration that R1, R3 and ADR resistors have
to be removed before connecting the evaluation board to a processor.
3-Axis Acceleration Sensor Evaluation Board, Part Nr. 2533203301691
User manual version 1.1 © April 2020
www.we-online.com/sensors 7