Datasheet

Packaging Specification - Tape and Reel: [mm]
Cover Tape
Carrier Tape
End
Start
Feeding direction
F
E1E2
T1
T2
T
A0
B0
P1
D0
P2
P0
K0
W
Top Cover
Tape
D1
No Component
min. 160mm
Components No Component
min. 100mm
Cover Tape
min. 400mm
A
A
A0 B0 W T T1 T2 K0 P0 P1 P2 D0 D1 E1 E2 F Tape Type 2a VPE / packaging unit
typ. typ. ± 0,3 ref. ref. typ. typ. ±0,1 ±0,1 ±0,5 +0,1/ -0,0 min. ±0,1 min. ±0,05 pcs.
3,80 8,50 16,00 0,35 0,10 4,75 4,30 4,00 8,00 2,00 1,50 1,50 1,75 14,25 7,50 Polystyrene 1800
1 6 5 ° - 1 8 0 °
Pull-of force
Tape width
16 mm
0,1 N - 1,3 N
B
D
C
W1
close to center
W3
W2
N
A
detail B
Embossment
Sprocket Hole
Chip Cavity
Cover Tape
B
A
(mm)
B
(mm)
C
(mm)
D
(mm)
N
(mm)
W1
(mm)
W2
(mm)
W3
(mm)
W3
(mm)
Material
± 2,0 min. min. min. min. + 2,0 max. min. max.
330,00 1,50 12,80 20,20 60,00 16,40 22,40 15,90 19,40 Polystyrene
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION
METHOD
ICH 001.001 2019-01-07 DIN ISO 2768-1m
DESCRIPTION
WS-TASV J-Bend SMT Tact Switch
ORDER CODE
434123043836
SIZE/TYPE BUSINESS UNIT STATUS PAGE
6.0 x 3.5 mm eiCan Valid 3/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.