Datasheet

1 /1
SWITCH
2015-02-09
465031712505
_________
JLi
Released
WS-PBSU
Push Button Switch,
Side push type, SMT version
9.8*18.5*5.9mm
DaF
SIZE
SIZE
DESCRIPTION
STATUS
PROJECTION
METHOD
PAGE
DATE
ORDER CODE
TECHNICAL REFERENCE
CHECKEDCREATED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Innductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
com. [phone] - 0
www.we-online.de
[e-mail]
GENERAL TOLERANCE
BUSINESS UNIT
A4
DIN ISO 2768-1m
REV.
BYDATE
FILE
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
a Contact: Copper Alloy with Silver; Schematic 2015-03-17 DaF
b Spring: Carbon Steel; Switsching function 2015-03-23 DaF
c dimension change part and pcb 2016-06-28 DaF
8,6 4,5 5,4
2,54
9,8
5,9 1,2
3,3
1,5
11,2
5,08
O
2,8
4,7
EPOXY SEAL
SCHEMATIC
7,0
2,4 4,6 2,8
5,08
2,54
O
1
,
4
1,4
P.C.B MOUNTINGPLAN
3
2
1
3
2
1
1,6
5,0
7,0
h 0,1 ref.
1,2
0,3
1,4
1,2
6,9
SPECIFICATION
>Rating: 0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~28V)
>Contact Resistance :
Initial : 50mΩ max.
After Life Test : 500mΩ max.
>Insulation Resistance : min. 500MΩ at 500VDC
>Dielectric Strength : 500VAC for 1 minute
>Total-Travel : 1.1 ±0.2 mm
>Bounce : 10 ms
>Switch function : momentary
>Actuator function : Auto-return
MATERIAL
>Bracket : Copper Alloy with Tin
>Cover : PA46 UL 94 V-0, color White
>Actuator : PA46 UL 94 V-0, color White
>Contact : Copper Alloy with Silver
>Terminal : Copper Alloy with Gold
>Spring : Steel
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
>Hand soldering under 350°C for 3sec. max
ENVIRONMENTAL
Storage condition : -40°C ~ +85°C
Operation condition : -40°C ~ +85°C
Compliance : ROHS, Reach
PACKAGING INFORMATION
> Tape & Reel
Part number Force Switching function Schematic Life Cycle
465 031 712 505 250g ± 100g ON - ON SPDT 30.000
1,0 6,0
Scale - 2:1
2,8