Datasheet

Dimensions: [mm]
10,0
19,0
O
1
,
4
7,5
8,7
3,175 ±0,2
10,3
12,9
2,013,0
16,5
0,8
4,375 ±0,2
12,5
4,0 ±0,2
21,0
15,00
1
2
4,75
Scale - 1,5:1
For detailed Marking description please see page 2 Component Marking.
L (mm) Panel
19,2 0,75 ~ 1,25
19,4 1,25 ~ 2,00
19,8 2,00 ~ 3,00
Panel cutout: [mm]
Recommended Hole Pattern: [mm]
L
12,9
+0,1 -0,0
Schematic:
12
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
DaSc MTH DIN ISO 2768-1m
DESCRIPTION
19.2 x 12.9 mm panel Cut-out with
0.187” quick connect terminal
Rocker Switch WS-RSTV
ORDER CODE
471001264143
REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
001.001 Valid 2017-11-13 eiCan 1/5
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.