Datasheet

Dimensions: [mm]
8,4
12,9
10,45
14,95
5,6
17,75
Scale - 2:1
Recommended PCB Layout [mm]:
O
2
,
1
±
0
,
0
5
O
2
,
5
±
0
,
0
5
O
1
,
4
+
0
,
1
-
0
,
0
5
8
x
2,54
1,27
2,5
2,54
1,23
2,54
1
Scale - 3:1
Drillhole specification for PCB:
1,55 -0,05 ( )
1,4
+0,1
-0,05
0,1max.
(20µm Cu)
Drill hole specification for chemical surfaces (Ni/Au)
Properties Value Unit Tol.
Insulator Material LCP
Insulator Flammability Rating UL94 V-0
Insulator Color Black
Contact Material CuNiSi
Contact Plating Au (SKEDD), Sn (IDC)
Pitch P 2.54 mm
Cable AWG 28/1.27 mm ribbon cable
Operating Temperature -25 °C up to +105 °C
Compliance Lead free / RoHS
Micro-cuts during vibration
(sinusoidal)
Discontinuity ≤ 1μs
Test conditions: 5g, 1h 45min/axis, 10 to 150 Hz, 20
cycles/axis, according to IEC 60068-2-6
Mating Cycle
1)
10 max.
Mating Cycle
2)
25 max.
PCB Thickness 1.6 mm
Properties:
1)
Standard application
2)
Application: debugging, programming
Properties Test conditions Value Unit Tol.
Rated Current @ 20 °C I
R
1 A
Working Voltage @ 20 °C 100 V (AC)
Insulation Resistance @ 20 °C R
ISO
1000 MΩ min.
Withstanding Voltage 1 min. @ 20 °C 500 V (AC)
Contact Resistance @ 20 °C R 10 mΩ max.
Electrical Properties:
Packaging Tube
Packaging Properties:
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
DaSc DKü DIN ISO 2768-1m
DESCRIPTION
REDFIT IDC SKEDD Connector WR-
WST
ORDER CODE
490107670812
REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
001.001 Valid 2017-11-13 eiCan 1/3
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.