Datasheet

Insulator Material PTFE
Insulator Color White
Center Contact Material Beryllium Copper
Center Contact Plating Gold, min. 0.76µm over Nickel
Body Material Brass
Body Plating Gold, min. 0.076µm over Nickel
Coupling Nut Material Brass
Coupling Nut Plating Gold, min. 0.076µm over Nickel
Retention Ring (C Ring) Material Stainless Steel
Retention Ring (C Ring) Plating Passivated
Gasket Material Silicone
Gasket Color Red
Material Properties:
Interface MIL-STD-348
Connector Type 1 RP SMA
Gender 1 Jack
Connector Type 2 SMA
Gender 2 Plug
Kind Properties:
Operating Temperature -65 °C up to +165 °C
Compliance RoHS
General Information:
Properties Test conditions Value Unit Tol.
Impedance DC~18 GHz Z 50 Ω
Frequency Range f DC~18 GHz
VSWR DC~18 GHz 1.3 max.
Insertion Loss DC~18 GHz IL 0.16 dB max.
Insulation Resistance 500 V (DC) in 120 sec. R
ISO
5000 MΩ min.
Contact Resistance Initial
1)
R 3 mΩ max.
Contact Resistance After Test
2)
R 4 mΩ max.
Contact Resistance Initial
3)
R 2 mΩ max.
Contact Resistance After Test
4)
R 2 mΩ max.
Withstanding Voltage 500 V (AC) in 60 sec. 1000 V (RMS) min.
Working Voltage
5)
335 V (RMS) min.
Electrical Properties:
1)
Center Contact
2)
Center Contact
3)
Outer Contact
4)
Outer Contact
5)
At sea level
Properties Value Unit Tol.
Center Contact Retention (Axial) 26.7 N min.
Mating Cycle 500 Cycles
Coupling Nut Retention 267 N min.
Recommended Mating Torque 57 Ncm
Mechanical Properties:
Properties Value
Packaging Bag
Packaging Unit Qty. 50
Packaging Properties:
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
DaSc JTs DIN ISO 2768-1m
DESCRIPTION
Coax Adaptor Reverse Polarity
SMA Jack to SMA Plug WR-ADPT
ORDER CODE
64430103211000
REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
001.000 Valid 2018-03-19 eiCan 2/4
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.