Data Sheet

ManualsBrandsWürth Elektronik ManualsConnectorsWürth Elektronik Enclosure Number of pins 4 Ivory 1 pc(s)

Dimensions: [mm]

L ±0,15

Pl ±0,10

1,00 ±0,08

0,20 ±0,10

3,40 ±0,15

5,8 ±0,10

0,7 ±0,15

2,20 ±0,10

0,1

+0,10

L1 -0,05

End

1,50 ±0,10

Properties Value Unit

Pins 4

Pin to Pin (Middle) P

3 mm

Length L 8.6 mm

Length L

5.1 mm

Article Properties:

Recommended Land Pattern: [mm]

pl ±0,05

1,00 ±0,05

0,60 ±0,05

1,3 ±0,10

2,00 ±0,15

1,2 ±0,10

End

1,80

1,30 ±0,10

Recommended FFC

Properties Value Unit

Pin to Pin (Middle) p

3 mm

Pattern Properties:

Würth Elektronik eiSos GmbH & Co. KG

EMC & Inductive Solutions

Max-Eyth-Str. 1

74638 Waldenburg

Germany

Tel. +49 (0) 79 42 945 - 0

www.we-online.com

eiSos@we-online.com

CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION

METHOD

GM 001.003 2018-11-09 DIN ISO 2768-1m

DESCRIPTION

WR-FPC SMT ZIF Horizontal Hinge

Type Bottom contact, 1.00 mm

ORDER CODE

686104148922

BUSINESS UNIT STATUS PAGE

eiCan Valid 1/5

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH

& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety

must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Summary of content (5 pages)

PAGE 1
Dimensions: [mm] Recommended Land Pattern: [mm] pl ±0,05 1,30 ±0,10 1,00 ±0,05 0,60 ±0,05 1 End 1 2,20 ±0,10 0,20 ±0,10 1,00 ±0,08 L ±0,15 2,00 ±0,15 Pl h 0,1 Pl Pl ±0,10 0,7 ±0,15 +0,10 L1 -0,05 5,8 ±0,10 1,50 ±0,10 3,40 ±0,15 Recommended FFC Pattern Properties: Properties Pin to Pin (Middle) Article Properties: Properties Value Pins 1,3 ±0,10 1,2 ±0,10 1,80 End Value Unit 3 mm pl CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE GM 001.
PAGE 2
Kind Properties: Certification: Properties Pitch P Durability Value Unit 1 mm 20 Mating cycles UL Approval E323964 Packaging Properties: Properties Material Properties: Value Packaging Insulator Material PA6T Insulator Flammability Rating Packaging Unit UL94 V-0 Insulator Color PA6T Actuator Flammability Rating In order to handle products correctly, please download our precaution guide which is available under “Tutorials” on our Homepage: www. we-online.
PAGE 3
Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max.
PAGE 4
Cautions and Warnings: The following conditions apply to all goods within the product services of the Connectors of Würth Elektronik eiSos GmbH & Co. KG: General: • This electronic component is designed and developed with the intention for use in general electronics equipment.
PAGE 5
Important Notes 6. Product Life Cycle The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG: Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance.