Datasheet

Card Detection Mechanism:
Card detection switch Write protection switch
Card removed Card inserted
Write Protect Write enable
OPEN
OPENCLOSE CLOSE
Card Position:
CARD WORKING
10,5
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION
METHOD
BaBo 002.000 2020-08-10 DIN ISO 2768-1m
DESCRIPTION
WR-CRD SD Card Connector
ORDER CODE
693063010911
SIZE/TYPE BUSINESS UNIT STATUS PAGE
Push & Pull - with Card Detection - 9 Pins eiCan Valid 2/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.