Data Sheet

DATEFILEREV
BY
Date
Checked
Drawn
Name
Scale
DESCRIPTION
Position
GENERAL TOLERANCE
DIN ISO 2768 T1m
Basic material
Projection
Drawing.- No.
A4
SIZE
Caps for 15x15mm 465xx11172501 illuminated Push Button switch WS-PBTL
714659001100
13-10-02
Fandrey
SwAccPB
2:1
System: Solid Edge ST4
13-10-02
Hsu
Scale - 2:1
This electronic component is designed and developed with the intention for use in general electronics
equipments.
Before incorporating the components into any equipments in the field such as aerospace, aviation,
nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc. where higher
safety and reliability are especially required or if there is possibility of direct damage or injury to
human body, Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when used in electrical
circuits that require high safety, reliability functions or performance, the sufficient reliability
evaluation-check for the safety must be performed before by the user before usage.
A
A
sectional drawing A-A
11,0q
11,6q
13,5
+0,05
0q
14,2
12,2
0,9
+0,05
0
1,8
4,2
5,3
2,6
5,9
7,0
15,0q
3,3
3,5
TECHNICAL CHARACTERISTICS
MATERIAL
> Cap : PC UL HB
> Diffuser Plate : PC UL HB
MOUNTING INSTRUCTION
> This part number is include the cap and diffuser plate as 1 set.
It´s not recommended to remove the diffuser plate away.
> Our Switch plunger is design with 2 tabs and cap with 4 notches.
All 4 directions can be assemble on the plunger.
> By install the cap, please put the cap on strait vertical down to the plunger.
By hearing a crispy sound, the cap is latched.
> If you need to remove the cap, please use with your finger(nails)
to pull up one side of the cap.
Part number Laser carving sign Base Color
714 659 001 100 No transparent
714 659 001 100
465 xx 11172501
23