Datasheet

Dimensions: [mm]
sectional drawing A-A
5M
3,0 ±0,5
17,5
9,0
q
5,0 ±0,2
detail B
3,5 ±0,2
0,3 ±0,2
Bevelled edge
around
2,54
7,62
7,62
5,0 ±0,2
A
A
B
Scale - 1:1
Drillhole specification for PCB:
1,475 ±0,05 O
1,60 -0,03 ( O ) 0,10min.
Drill hole specification for chemical surfaces
min. 25µm copper max. 60µm
Drillhole specification for PCB:
1,45 ±0,05 O
1,60 -0,03 ( O )
max. 15µm Sn
0,10min.
Drill hole specification for HAL
min. 25µm copper max. 60µm
Properties Value Unit Tol.
Material Brass
Surface Tin
Execution Press-Fit
Tightening Torque 2.2 Nm
Operating Temperature -55 °C up to +150 °C
Storage Conditions 0 °C up to +40 °C, < 75% RH
Insertion Force 40 N per Pin min.
Extraction Force
1)
30 N per Pin min.
PCB Thickness min 1.6 mm
PCB Thickness max 3.2 mm
Properties:
1)
min. 24hours after Press-Fit Process
Properties Test conditions Value Unit Tol.
Rated Current @ 20 °C I
R
160 A max.
Electrical Properties:
Packaging Bulk
Packaging Properties:
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
DaMa WlW DIN ISO 2768-1m
DESCRIPTION
REDCUBE PRESS-FIT right angled
with two rows pin-plate WP-RATR
ORDER CODE
7461103
REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
001.002 Valid 2017-10-19 eiCan 1/3
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.