Datasheet

Dimensions: [mm]
Adhesive Tape
PET
Ferrite
PET
Glue
Copper Coil
PET
Copper Coil
Copper Coil
27,0 ±0,5
40,0 ±0,5 25,0 ±2,0
5,0 ±2,0
sectional drawing A-A
detail B
1,0 max.
Release Paper
A
A
B
Scale - 1:1
Marking 760308103307
Product Marking:
Recommended Hole Pattern: [mm]
1
2
2,0 min. 4,0 ref. 2,0 min.
3
4
O 1,0
Scale - 5:1
Schematic:
L1
L2
1
2
3
4
Properties Test conditions
Value
Unit Tol.
1 2
Inductance
125 kHz/ 10 mA
13.65 MHz
L 7.8 1.6 µH ±10%
Q-Factor
125 kHz/ 10 mA
13.65 MHz
Q 19 47 typ.
Rated Current ΔT = 40 K I
R
1.5 4 A max.
Saturation Current I
SAT
3 7 A typ.
DC Resistance @ 20 °C R
DC
330 80 mΩ typ.
DC Resistance @ 20 °C R
DC
340 90 mΩ max.
Self Resonant Frequency f
res
22 24 MHz
Electrical Properties:
It is recommended that the temperature of the component does not exceed +105°C under worst
case conditions
Operating Temperature -20 °C up to +105 °C
Storage Temperature (in original
packaging)
-20 °C up to +65 °C
Test conditions of Electrical Properties: +20°C, 33% RH if not specified differently
General Information:
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
KaS CSo DIN ISO 2768-1m
DESCRIPTION
WE-WPCC Wireless Power
Transfer Receiver Coil
ORDER CODE
760308103307
SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
4027
001.001 Valid 2017-12-08 eiSos 1/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.