User Manual

10/11
www.rohm.com
© 2016 ROHM Co., Ltd. All rights reserved.
Wireless Power Design Kit – Medium Power – 760308MP V1.0
Design Kit Manual
EUDC59-U-004 - Rev. 1.0
N o t e s
This EVK is
 only to be used as device under test for research and development purposes.
 only to be operated by trained professionals.
 not to be assembled into a final product.
Additional Terms, warnings, restrictions and disclaimers of the Würth Elektronik and
ROHM Semiconductor Wireless Power Design Kit (later defined as DESIGN KIT)
Würth Elektronik (later defined as WE) and ROHM Semiconductor (later defined as ROHM)
provide the enclosed DESIGN KIT under the following conditions: The user has to bear all
responsibility and liability for the proper and safe handling with regard to this DESIGN KIT. The
user shall indemnify WE and ROHM from all claims arising from the handling or utilization of the
DESIGN KIT. In the case this DESIGN KIT does not comply with the specifications indicated in
the Quick Start Guide and Manual, the DESIGN KIT may be returned within 30 days from the
date of delivery for a full reimbursement of the purchase price.
THE FOREGOING LIMITED WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY WE and
ROHM TO THE USER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,
IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THE INDEMNITY
SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Please read the Quick Start Guide and Manual carefully prior to handling the DESIGN KIT.
This Guide contains essential safety information regarding temperatures and voltages.
No license is granted under any patent right or other intellectual property rights of WE or ROHM
covering or relating to any machine, process and procedure, or combination in which such the
DESIGN KIT or services might be or are used. Our arrangement with the user is not exclusive as
WE and ROHM are currently working with a large number of customers for DESIGN KITs. WE
and ROHM bear no liability for applications assistance, customer product design, software
performance, or infringement of patents or services described in the Quick Start Guide and
Manual.
Code of federal regulations
As noted in the DESIGN KIT Quick Start Guide and Manual, this DESIGN KIT and/or
accompanying hardware may or may not be subject to and compliant with the Code of Federal
Regulations, Title 47, Part 15. For DESIGN KITs annotated to comply with the Code of Federal
Regulations, Title 47, Part 15. Operation is subject to the following two conditions:
(1) This DESIGN KIT may not cause harmful interference, and (2) this DESIGN KIT must accept
any interference received, including interference that may cause undesired operation. Changes
or modifications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment. This DESIGN KIT as a Class A digital apparatus
complies with Canadian ICES-003. Changes or modifications not expressly approved by the
party responsible for compliance could void the users’ authority to operate the equipment.
For DESIGN KITs annotated as not subject to or compliant with the Code of Federal Regulations,
Title 47, Part 15. This DESIGN KIT is intended for use for ENGINEERING DEVELOPMENT,
DESIGNSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by WE and
ROHM to be a finished end product fit for general consumer use. It generates, uses, and can
radiate radio frequency energy and has not been tested for compliance with the limits of
computing devices pursuant to the Code of Federal Regulations, Title 47, Part 15, which are
designed to provide reasonable protection against radio frequency interference. Operation of the
equipment may cause interference with radio communications, in which case the user at its own
expense will be required to take whatever measures may be required to correct this interference.
For Feasibility Evaluation Only, in Laboratory/Development Environments. The DESIGN
KIT is not a complete product. It is intended exclusively for preliminary feasibility evaluation in
laboratory/development environments by technically qualified electronics experts. Those experts
mandatory have to be familiar with the dangers and application risks in connection with handling
electrical mechanical components, systems and subsystems. It should not be used as an end
product or as a part of an end product.