Datasheet

Dimensions: [mm]
45,0 ±1,0
12,0 ±1,0
28,5 ±1,0
92,2 ±1,0
103,0 ±1,0
114,9 ±1,0
6,8 ±0,52x
5,0 ±0,52x
detail A
6,3 ±0,15x
0,8 ±0,035x
32,4 ±1,0
8,9 min. 15,5 ±1,0
7,9 min.
58,5 ±1,0
A
Scale 1:3
Properties Value Unit Tol.
Weight m 318 g typ.
Mechanical Properties:
Recommended Screw Thread: [mm]
M4
103,0
Scale 1:3
Schematic:
L
PE
N
L 1
L 2
L'
N'
R
C X
C Y
C Y
C X
L 3
C X
L 4
L1=L2=L3=L4=L
Properties Test conditions Value Unit Tol.
Rated Voltage U
R
250 V (AC), 50/60 Hz
250 V (DC)
250 V max.
Rated Current I
R
@ 40 °C/ ΔT< 60 K 6 A max.
Leakage Current I
Leak
250 V (AC)/ 50 Hz 0.369 mA typ.
DC Resistance R
DC
@ 20 °C 70 mΩ max.
Inductance L 10 kHz/ 0.1 mA 6 mH +50%/-30%
X2-Capacitance C
X
1 kHz/ 1 V 0.47 µF ±10%
Y2-Capacitance C
Y
1 kHz/ 1 V 4.7 nF ±20%
Discharge Resistance R @ 20 °C 330 kΩ ±10
Insulation Test Voltage
L->PE
U
T 1
50 Hz/ 2 s/ 10 mA 2000 V (AC) max.
Insulation Test Voltage
L->N
U
T 2
2 s/ 10 mA 1075 V (DC) max.
Electrical Properties:
Operating Temperature -25 up to +100 °C
Climatic Category 25/100/21
Rated Temperature T
R
40 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 75 % RH
Flammability Rating according to UL94 V-0
Moisture Sensitivity Level (MSL) 1
Leakage current is calculated according to IEC 60939-3. If the neutral line is interrupted, worst
case leakage current could reach twice this level. There is no leakage current for DC applications.
Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently
General Information:
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
FBo WPi DIN ISO 2768-1m
DESCRIPTION
WE-CLFS Line Filter Two-Stage
ORDER CODE
810913006
REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
001.000 Draft 2018-11-13 eiSos 1/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.