Data Sheet

Dimensions: [mm]
sectional drawing A-A
3,0M
1,0G
u
0,1
O
6,0
O
4,2
A
A
Properties Value Unit
Pin length G 11.6 mm
Article Properties:
Recommended Land Pattern: [mm]
O
4,5
O
7,4
Suggested
Solder pad
O 4,4
Non plated
through hole
Scale - 3:1
Stencil Suggestion:
O
4,48
O
7,27
0,80
Scale - 5:1
Properties Value Unit
Thread M3
Inner Diameter Ø ID 4.2 mm
Outer Diameter Ø OD 6 mm
Material Steel
Surface Tin
Solder Cream Thickness 150 µm
Tightening Torque 0.5 Nm
Properties:
Packaging Tape and Reel
Packaging Unit (Qty.) Qty. 300
In Tape & Reel packaging a kapton-film is fixed on the top of the spacer for automatic assembly.
During the programming of the Pick and Place machine and the AOI, please consider the flap of the
kapton-film.
Please ensure that the z-axis of the Pick and Place machine is adjusted for the negative area.
Packaging Properties:
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
DaSc JuSa DIN ISO 2768-1m
DESCRIPTION
WA-SMSR SMD Steel Spacer
Reverse with internal Thread M3
ORDER CODE
9775116360R
REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
001.002 Valid 2017-11-22 eiCan 1/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.