User's Manual
1. How to Use the Devices?
The device is standing only. As below:
2. Hardware Connections for the 4 models
a. Open the PON Cover, connect the fiber cable to the Fiber SC connector of the device.
b.Use a Gigabit Ethernet Cable to connect a computer to an Ethernet port for initial
configuration and/or internet connection.
C. Use the provided UPS or Power Adaptor source to the POWER Socket. Need to push the
ON/OFF button to the ON position if Power Adaptor is used.
d. Connect the USB dongle to the USB port if USB wants to be used
Connectors Sequence
(TopDown)
– According to PWBA design
LED Sequence (TopDown)
– According to PWBA design
USB
Power
Reset Button
Broadband
LAN4
Service
LAN3
Wi-Fi 2.4GHz
LAN2
Wi-Fi 5GHz
LAN1
Ethernet 4
FXS1
Ethernet 3
FXS2
Ethernet 2
Power Jack
Ethernet 1
UPS Connector
Phone1
Phone2
USB
WPS separate LED
WPS button