User's Manual

Chapter 11 Port Binding 137
11.2 The Port Binding Screen
Use this screen to enable or disable port binding or any port any service. Click Network Setting >
Port Binding. If you want to enable the port binding feature and configure port binding groups,
select Enable Port Binding.
Figure 90 Netw
ork Setting > Port Binding: Enable Port Binding
The following table describes the labels in this screen.
Table 52 Network
Setting > Port Binding: Enable Port Binding
LABEL DESCRIPTION
Active Activate or deactivate the port binding group.
Group Index Select the index number for the port binding group.
When a port is assigned to a port binding group, traffic will be forwarded to the other
ports
in the group, but not to ports in other groups. If a port is not included in any
groups, traffic will be forwarded according to the routing table.
ATM VCs Select the ATM VC (PVC) to include in the port binding group. Each ATM VC can only be
bound to one gr
oup.
Ethernet Select the Ethernet (Eth) ports to include in the port binding group. Each Ethernet
port can only be bound to one gr
oup.
Wireless LAN Select the WLAN (AP) connections to include in the port binding group. Additional APs
can be enabled on the Mor
e AP screen (Section 6.3 on page 59).
Group Summary
Port Binding
Sum
mary
Click this to view a summary of configured port binding groups.