User's Manual
Table Of Contents
- DSL-100HNU-T1 v3 User’s Guide
- Contents
- Introduction
- Introducing the Web Configurator
- Quick Start
- Connection Status and System Info
- WAN Setup
- Wireless
- Home Networking
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Port Binding
- Dynamic DNS
- Filter
- Firewall
- Parental Control
- Certificates
- System Monitor
- User Account
- TR-069 Client
- System
- Time Setting
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Remote Management
- Diagnostic
- Troubleshooting
- Legal Information
Chapter 26 Diagnostic 217
The following table describes the fields in this screen.
Table 92 M
aintenance > Diagnostic > Ping
LABEL DESCRIPTION
Ping Type the IP address of a computer that you want
to ping in order to test a connection. Click
Ping and the ping statistics will show in the diagnostic .
PingV6 Click this to ping the IPv6 address that you entered.
TracerouteV
6
Click this to show the path that packets take fr
om the system to the IPv6 address that you
entered.
TraceRouteV
4
Click this button to perform the traceroute function
. This determines the path a packet takes
to the specified host.
26.3 The DSL Line Screen
Use this screen to view the DSL line statistics and reset the DSL line. Click Maintenance >
Diagnostic > DSL Line. This screen is different for ADSL and VDSL connections. If your WAN
connection is ADSL, the screen is as shown next.
Figure 146 M
aintenance > Diagnostic > DSL Line: ADSL