User's Manual

ManualsBrandsWuxi MitraStar Technology ManualsElectronics802.11n 2x2 Wireless ADSL2+ 4-port Gateway

Table Of Contents

DSL-100HNU-T1 v3 User’s Guide
Contents
Introduction
- 1.1 Overview
- 1.2 Ways to Manage the Device
- 1.3 Good Habits for Managing the Device
- 1.4 Applications for the Device
  - 1.4.1 Internet Access
- 1.5 Wireless Access
  - 1.5.1 Using the WLAN/WPS Button
- 1.6 The RESET Button
  - 1.6.1 Using the Reset Button
- 1.7 LEDs (Lights)
Introducing the Web Configurator
- 2.1 Overview
  - 2.1.1 Accessing the Web Configurator
- 2.2 The Web Configurator Layout
  - 2.2.1 Title Bar
  - 2.2.2 Main Window
Quick Start
- 3.1 Overview
- 3.2 Quick Start Setup
Connection Status and System Info
- 4.1 Overview
- 4.2 The Connection Status Screen
- 4.3 The System Info Screen
WAN Setup
- 5.1 Overview
- 5.2 The Internet Connection Screen
  - 5.2.1 Advanced Internet Connection
- 5.3 The More Connections Screen
  - 5.3.1 More Connections Edit
  - 5.3.2 Configuring More Connections Advanced Setup
- 5.4 The 3G Backup Screen
- 5.5 WAN Technical Reference
Wireless
- 6.1 Overview
- 6.2 Wireless General Screen
- 6.3 More AP Screen
  - 6.3.1 Edit More AP
- 6.4 MAC Authentication Screen
- 6.5 The WPS Screen
- 6.6 The WDS Screen
- 6.7 The WMM Screen
- 6.8 Scheduling Screen
  - 6.8.1 Add or Edit Schedule
- 6.9 Advanced Screen
- 6.10 Technical Reference
Home Networking
- 7.1 Overview
  - 7.1.1 What You Can Do in this Chapter
  - 7.1.2 What You Need To Know
- 7.2 The LAN Setup Screen
- 7.3 The Static DHCP Screen
  - 7.3.1 Before You Begin
- 7.4 The IP Alias Screen
- 7.5 The UPnP Screen
- 7.6 The IPv6 LAN Setup Screen
- 7.7 The File Sharing Screen
  - 7.7.1 Before You Begin
  - 7.7.2 Edit File Sharing User
- 7.8 The Printer Server Screen
  - 7.8.1 Before You Begin
- 7.9 Technical Reference
- 7.10 Installing UPnP in Windows Example
- 7.11 Using UPnP in Windows XP Example
Static Route
- 8.1 Overview
  - 8.1.1 What You Can Do in this Chapter
- 8.2 Configuring Static Route
  - 8.2.1 Add/Edit Static Route
- 8.3 IPv6 Static Route
  - 8.3.1 IPv6 Static Route Edit
Quality of Service (QoS)
- 9.1 Overview
  - 9.1.1 What You Can Do in this Chapter
  - 9.1.2 What You Need to Know
- 9.2 The QoS General Screen
- 9.3 The Queue Setup Screen
  - 9.3.1 Edit a QoS Queue
- 9.4 The Class Setup Screen
  - 9.4.1 Add/Edit QoS Class
- 9.5 The QoS Policer Setup Screen
  - 9.5.1 Add/Edit a QoS Policer
- 9.6 The QoS Game List Screen
- 9.7 QoS Technical Reference
  - 9.7.1 DiffServ
Network Address Translation (NAT)
- 10.1 Overview
  - 10.1.1 What You Can Do in this Chapter
  - 10.1.2 What You Need To Know
- 10.2 The General Screen
- 10.3 The Port Forwarding Screen
  - 10.3.1 The Port Forwarding Screen
  - 10.3.2 The Port Forwarding Add/Edit Screen
- 10.4 The DMZ Screen
- 10.5 The ALG Screen
- 10.6 Technical Reference
Port Binding
- 11.1 Overview
- 11.2 The Port Binding Screen
  - 11.2.1 Port Binding Summary Screen
  - 11.2.2 The Any Port Any Service Edit Screen
Dynamic DNS
- 12.1 Overview
  - 12.1.1 What You Need To Know
- 12.2 The Dynamic DNS Screen
Filter
- 13.1 Overview
  - 13.1.1 What You Can Do in the Filter Screens
- 13.2 The IP/MAC Filter Screen
- 13.3 The IPv6/MAC Filter Screen
Firewall
- 14.1 Overview
  - 14.1.1 What You Can Do in the Firewall Screens
  - 14.1.2 What You Need to Know About Firewall
- 14.2 Firewall General Screen
- 14.3 Default Action Screen
- 14.4 Rules Screen
- 14.5 DoS Screen
  - 14.5.1 The DoS Advanced Screen
  - 14.5.2 Configuring Firewall Thresholds
- 14.6 Firewall Technical Reference
Parental Control
- 15.1 Overview
- 15.2 The Parental Control Screen
  - 15.2.1 Add/Edit a Parental Control Rule
Certificates
- 16.1 Overview
- 16.2 Local Certificates
- 16.3 Trusted CA
- 16.4 Trusted CA Import
- 16.5 View Certificate
System Monitor
- 17.1 Overview
  - 17.1.1 What You Can Do in this Chapter
  - 17.1.2 What You Need To Know
- 17.2 The Log Screen
- 17.3 The WAN Traffic Status Screen
- 17.4 The LAN Traffic Status Screen
- 17.5 The NAT Traffic Status Screen
User Account
- 18.1 Overview
- 18.2 The User Account Screen
TR-069 Client
- 19.1 Overview
- 19.2 The TR-069 Client Screen
System
- 20.1 Overview
- 20.2 The System Screen
Time Setting
- 21.1 Overview
- 21.2 The Time Setting Screen
Log Setting
- 22.1 Overview
- 22.2 The Log Setting Screen
Firmware Upgrade
- 23.1 Overview
- 23.2 The Firmware Upgrade Screen
Backup/Restore
- 24.1 Overview
- 24.2 The Backup/Restore Screen
- 24.3 The Reboot Screen
Remote Management
- 25.1 Overview
  - 25.1.1 What You Can Do in the Remote Management Screens
  - 25.1.2 What You Need to Know About Remote Management
- 25.2 The WWW Screen
  - 25.2.1 Configuring the WWW Screen
- 25.3 Telnet Screen
- 25.4 FTP Screen
- 25.5 SNMP Screen
  - 25.5.1 Configuring SNMP
- 25.6 DNS Screen
- 25.7 ICMP Screen
- 25.8 SSH Screen
  - 25.8.1 SSH Example
Diagnostic
- 26.1 Overview
  - 26.1.1 What You Can Do in the Diagnostic Screens
- 26.2 The Ping Screen
- 26.3 The DSL Line Screen
Troubleshooting
- 27.1 Overview
- 27.2 Power, Hardware Connections, and LEDs
- 27.3 Device Access and Login
- 27.4 Internet Access
- 27.5 Wireless Internet Access
- 27.6 USB Device Connection
- 27.7 UPnP
Legal Information

Chapter 5 WAN Setup 34

Virtual Circuit ID VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit.

Refer to the appendix for more information.

IP Address You can use these options when you set the Mode field to Router and the IPv6/IPv4

Dual Stack field to IPv4 or IPv4/IPv6.

Select Obtain an IP Address Automatically if the ISP assigns you a dynamic IP

address; otherwise select Static IP Address and type your ISP assigned IP address in

the IP Address field below.

Static IP Address Select this option If the ISP assigned a fixed IP address.

IP Address Enter the static IP address provided by your ISP.

IPv6 Tunnel Mode This is available if you select ENET ENCAP or PPPoE in the Encapsulation field and

IPv4 in the IPv6/IPv4 Dual Stack field.

Select 6rd to tunnel IPv6 traffic from the local network through the ISP’s IPv4

network.

Select 6to4 to enable IPv6 to IPv4 tunneling. This will encapsulate IPv6 packets in

IPv4 packets so they can travel through IPv4 networks.

Relay Server If you select 6to4 in the IPv6 Tunnel Mode field, enter the tunneling relay server's

IPv4 address in this field.

Via DHCP Option

212

Select this to have the Device detect it automatically through DHCP option 212.

Manual Select this to manually enter the following 6rd information.

6rd Prefix Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP’s Border Relay router and

connecting to the native IPv6 Internet.

6rd Prefix Length Enter the IPv6 prefix length.

IPv4 Mask Length Enter the subnet mask number for the IPv4 network.

Relay Server Enter the relay server’s IPv4 address.

DNS Server

Primary / Secondary

DNS

Set how the Device gets the IP addresses of the DNS servers it uses.

UserDefined - enter a static IP address.

Obtained From ISP - when the Device gets its IP address automatically, you can

select this to have it also get the DNS server address.

None - the Device does not use the DNS server entry.

IPv6 Address

Obtain an IP Address

Automatically

Select this option to have the Device use the IPv6 prefix from the connected router’s

Router Advertisement (RA) to generate an IPv6 address.

Static IP Address When you set the Encapsulation field to ENET ENCAP, select the Static IP Address

option if you have a fixed IPv6 address assigned by your ISP.

Table 3 Network Setting > Broadband >Internet Connection (continued)

LABEL DESCRIPTION