User's Manual

ManualsBrandsWuxi MitraStar Technology ManualsElectronics802.11n 2x2 Wireless ADSL2+ 4-port Gateway

Table Of Contents

DSL-100HNU-T1 v3 User’s Guide
Contents
Introduction
- 1.1 Overview
- 1.2 Ways to Manage the Device
- 1.3 Good Habits for Managing the Device
- 1.4 Applications for the Device
  - 1.4.1 Internet Access
- 1.5 Wireless Access
  - 1.5.1 Using the WLAN/WPS Button
- 1.6 The RESET Button
  - 1.6.1 Using the Reset Button
- 1.7 LEDs (Lights)
Introducing the Web Configurator
- 2.1 Overview
  - 2.1.1 Accessing the Web Configurator
- 2.2 The Web Configurator Layout
  - 2.2.1 Title Bar
  - 2.2.2 Main Window
Quick Start
- 3.1 Overview
- 3.2 Quick Start Setup
Connection Status and System Info
- 4.1 Overview
- 4.2 The Connection Status Screen
- 4.3 The System Info Screen
WAN Setup
- 5.1 Overview
- 5.2 The Internet Connection Screen
  - 5.2.1 Advanced Internet Connection
- 5.3 The More Connections Screen
  - 5.3.1 More Connections Edit
  - 5.3.2 Configuring More Connections Advanced Setup
- 5.4 The 3G Backup Screen
- 5.5 WAN Technical Reference
Wireless
- 6.1 Overview
- 6.2 Wireless General Screen
- 6.3 More AP Screen
  - 6.3.1 Edit More AP
- 6.4 MAC Authentication Screen
- 6.5 The WPS Screen
- 6.6 The WDS Screen
- 6.7 The WMM Screen
- 6.8 Scheduling Screen
  - 6.8.1 Add or Edit Schedule
- 6.9 Advanced Screen
- 6.10 Technical Reference
Home Networking
- 7.1 Overview
  - 7.1.1 What You Can Do in this Chapter
  - 7.1.2 What You Need To Know
- 7.2 The LAN Setup Screen
- 7.3 The Static DHCP Screen
  - 7.3.1 Before You Begin
- 7.4 The IP Alias Screen
- 7.5 The UPnP Screen
- 7.6 The IPv6 LAN Setup Screen
- 7.7 The File Sharing Screen
  - 7.7.1 Before You Begin
  - 7.7.2 Edit File Sharing User
- 7.8 The Printer Server Screen
  - 7.8.1 Before You Begin
- 7.9 Technical Reference
- 7.10 Installing UPnP in Windows Example
- 7.11 Using UPnP in Windows XP Example
Static Route
- 8.1 Overview
  - 8.1.1 What You Can Do in this Chapter
- 8.2 Configuring Static Route
  - 8.2.1 Add/Edit Static Route
- 8.3 IPv6 Static Route
  - 8.3.1 IPv6 Static Route Edit
Quality of Service (QoS)
- 9.1 Overview
  - 9.1.1 What You Can Do in this Chapter
  - 9.1.2 What You Need to Know
- 9.2 The QoS General Screen
- 9.3 The Queue Setup Screen
  - 9.3.1 Edit a QoS Queue
- 9.4 The Class Setup Screen
  - 9.4.1 Add/Edit QoS Class
- 9.5 The QoS Policer Setup Screen
  - 9.5.1 Add/Edit a QoS Policer
- 9.6 The QoS Game List Screen
- 9.7 QoS Technical Reference
  - 9.7.1 DiffServ
Network Address Translation (NAT)
- 10.1 Overview
  - 10.1.1 What You Can Do in this Chapter
  - 10.1.2 What You Need To Know
- 10.2 The General Screen
- 10.3 The Port Forwarding Screen
  - 10.3.1 The Port Forwarding Screen
  - 10.3.2 The Port Forwarding Add/Edit Screen
- 10.4 The DMZ Screen
- 10.5 The ALG Screen
- 10.6 Technical Reference
Port Binding
- 11.1 Overview
- 11.2 The Port Binding Screen
  - 11.2.1 Port Binding Summary Screen
  - 11.2.2 The Any Port Any Service Edit Screen
Dynamic DNS
- 12.1 Overview
  - 12.1.1 What You Need To Know
- 12.2 The Dynamic DNS Screen
Filter
- 13.1 Overview
  - 13.1.1 What You Can Do in the Filter Screens
- 13.2 The IP/MAC Filter Screen
- 13.3 The IPv6/MAC Filter Screen
Firewall
- 14.1 Overview
  - 14.1.1 What You Can Do in the Firewall Screens
  - 14.1.2 What You Need to Know About Firewall
- 14.2 Firewall General Screen
- 14.3 Default Action Screen
- 14.4 Rules Screen
- 14.5 DoS Screen
  - 14.5.1 The DoS Advanced Screen
  - 14.5.2 Configuring Firewall Thresholds
- 14.6 Firewall Technical Reference
Parental Control
- 15.1 Overview
- 15.2 The Parental Control Screen
  - 15.2.1 Add/Edit a Parental Control Rule
Certificates
- 16.1 Overview
- 16.2 Local Certificates
- 16.3 Trusted CA
- 16.4 Trusted CA Import
- 16.5 View Certificate
System Monitor
- 17.1 Overview
  - 17.1.1 What You Can Do in this Chapter
  - 17.1.2 What You Need To Know
- 17.2 The Log Screen
- 17.3 The WAN Traffic Status Screen
- 17.4 The LAN Traffic Status Screen
- 17.5 The NAT Traffic Status Screen
User Account
- 18.1 Overview
- 18.2 The User Account Screen
TR-069 Client
- 19.1 Overview
- 19.2 The TR-069 Client Screen
System
- 20.1 Overview
- 20.2 The System Screen
Time Setting
- 21.1 Overview
- 21.2 The Time Setting Screen
Log Setting
- 22.1 Overview
- 22.2 The Log Setting Screen
Firmware Upgrade
- 23.1 Overview
- 23.2 The Firmware Upgrade Screen
Backup/Restore
- 24.1 Overview
- 24.2 The Backup/Restore Screen
- 24.3 The Reboot Screen
Remote Management
- 25.1 Overview
  - 25.1.1 What You Can Do in the Remote Management Screens
  - 25.1.2 What You Need to Know About Remote Management
- 25.2 The WWW Screen
  - 25.2.1 Configuring the WWW Screen
- 25.3 Telnet Screen
- 25.4 FTP Screen
- 25.5 SNMP Screen
  - 25.5.1 Configuring SNMP
- 25.6 DNS Screen
- 25.7 ICMP Screen
- 25.8 SSH Screen
  - 25.8.1 SSH Example
Diagnostic
- 26.1 Overview
  - 26.1.1 What You Can Do in the Diagnostic Screens
- 26.2 The Ping Screen
- 26.3 The DSL Line Screen
Troubleshooting
- 27.1 Overview
- 27.2 Power, Hardware Connections, and LEDs
- 27.3 Device Access and Login
- 27.4 Internet Access
- 27.5 Wireless Internet Access
- 27.6 USB Device Connection
- 27.7 UPnP
Legal Information

Chapter 6 Wireless 54

6.2.1 No Security

Select No Security to allow wireless stations to communicate with the access points without any

data encryption or authentication.

 If you do not enable any wireless security on your Device, your network is accessible to any

wireless networking device that is within range.

Figure 27 Wireless > General: No Security

MBSSID/LAN

Isolation

Select this to keep the wireless clients in this SSID from communicating with clients in

other SSIDs or wired LAN devices through the Device.

Select both Cl

ient Isolation and MBSSID/LAN Isolation to allow this SSID’s wireless

clients to only connect to the Internet through the Device.

Channel Selection Set the channel depending on your particular region.

Select a channel or use Au

to to have the Device automatically determine a channel to

use. If you are having problems with wireless interference, changing the channel may

help. Try to use a channel that is as many channels away from any channels used by

neighboring APs as possible. The channel number which the Device is currently using

then displays in the Operating Channel field.

Scan Click this button to have the D

evice immediately scan for and select a channel (which

is not used by another device) whenever the device reboots or the wireless setting is

changed.

Operating Channel This is the channel currently being used by your AP.

Security Level

Security Mode Select Ba

sic or More Secure to add security on this wireless network. The wireless

clients which want to associate to this network must have same wireless security

settings as the Device. When you select to use a security, additional options appears

in this screen.

Or you can select No Security to allow any client to associate with this network

without any data encryption or authentication.

See the following sections for more details abou

t wireless security modes.

Apply Click Apply to save your chang

es back to the Device.

Cancel Click Ca

ncel to restore your previously saved settings.

Table 9 Network > Wireless LAN > General (continued)

LABEL DESCRIPTION