User's Manual

Chapter 6 Wireless 58
Click Network
Settings > Wireless to display the General screen. Select More Secure as the
security level. Then select WPA2 from the Security Mode list.
Figure 30 W
ireless > General: More Secure: WPA2
The following table describes the labels in this screen.
Table 13 W
ireless > General: More Secure: WPA2
LABEL DESCRIPTION
Security Level Select M
ore Secure to enable WPA2 data encryption.
Security Mode Choose WP
A2 from the drop-down list box.
Authentication Server
IP Address Enter the IP address of the external authentication server in do
tted decimal notation.
Port Number Enter the port number of the external authentication server. The default port number
is 18
12.
You need not change this value unless your network administrator instructs you to do
so
with additional information.
Shared Secret Enter a password (up to 128 alphanumeric char
acters) as the key to be shared between
the external authentication server and the Device.
The key must be the same on the external authentication server and your Device. The
k
ey is not sent over the network.
more.../hide more Click mor
e... to show more fields in this section. Click hide more to hide them.