User's Manual

Chapter 6 Wireless 59
6.3 More AP Screen
The Device can broadcast up to four wireless network names at the same time. This means that
users can connect to the Device using different SSIDs. You can secure the connection on each SSID
profile so that wireless clients connecting to the Device using different SSIDs cannot communicate
with each other.
This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the Device.
Click Network
Settings > Wireless > More AP. The following screen displays.
Figure 31 Network Settings >
Wireless > More AP
ReAuthentication
Timer
Specify how often wireless stations have to resend user names and passwords in order
to stay connected.
The default value is 0, which means the reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the
r
eauthentication timer on the RADIUS server has priority.
WPA Compatible Select this if you want the Device to support WPA and WPA2 simultaneously.
Group Key Update
Timer
The Gr
oup Key Update Timer is the rate at which the RADIUS server sends a new
group key out to all clients.
If the value is set to “0”, the update timer function
is disabled.
Encryption If the security mode is WP
A2 and WPA-PSK Compatible is disabled, the encryption
mode is set to AES to enable Advanced Encryption System (AES) security on your
wireless network. AES provides superior security to TKIP.
If the security mode is WP
A2 and WPA-PSK Compatible is enabled, the encryption
mode also allows you to select TKIPAES MIX to allow both TKIP and AES types of
security in your wireless network.
Table 13 Wireless > General: More Secure: WPA2 (continued)
LABEL DESCRIPTION