User's Manual

ManualsBrandsWuxi MitraStar Technology ManualsElectronics802.11n 2x2 Wireless ADSL2+ 4-port Gateway

Table Of Contents

DSL-100HNU-T1 v3 User’s Guide
Contents
Introduction
- 1.1 Overview
- 1.2 Ways to Manage the Device
- 1.3 Good Habits for Managing the Device
- 1.4 Applications for the Device
  - 1.4.1 Internet Access
- 1.5 Wireless Access
  - 1.5.1 Using the WLAN/WPS Button
- 1.6 The RESET Button
  - 1.6.1 Using the Reset Button
- 1.7 LEDs (Lights)
Introducing the Web Configurator
- 2.1 Overview
  - 2.1.1 Accessing the Web Configurator
- 2.2 The Web Configurator Layout
  - 2.2.1 Title Bar
  - 2.2.2 Main Window
Quick Start
- 3.1 Overview
- 3.2 Quick Start Setup
Connection Status and System Info
- 4.1 Overview
- 4.2 The Connection Status Screen
- 4.3 The System Info Screen
WAN Setup
- 5.1 Overview
- 5.2 The Internet Connection Screen
  - 5.2.1 Advanced Internet Connection
- 5.3 The More Connections Screen
  - 5.3.1 More Connections Edit
  - 5.3.2 Configuring More Connections Advanced Setup
- 5.4 The 3G Backup Screen
- 5.5 WAN Technical Reference
Wireless
- 6.1 Overview
- 6.2 Wireless General Screen
- 6.3 More AP Screen
  - 6.3.1 Edit More AP
- 6.4 MAC Authentication Screen
- 6.5 The WPS Screen
- 6.6 The WDS Screen
- 6.7 The WMM Screen
- 6.8 Scheduling Screen
  - 6.8.1 Add or Edit Schedule
- 6.9 Advanced Screen
- 6.10 Technical Reference
Home Networking
- 7.1 Overview
  - 7.1.1 What You Can Do in this Chapter
  - 7.1.2 What You Need To Know
- 7.2 The LAN Setup Screen
- 7.3 The Static DHCP Screen
  - 7.3.1 Before You Begin
- 7.4 The IP Alias Screen
- 7.5 The UPnP Screen
- 7.6 The IPv6 LAN Setup Screen
- 7.7 The File Sharing Screen
  - 7.7.1 Before You Begin
  - 7.7.2 Edit File Sharing User
- 7.8 The Printer Server Screen
  - 7.8.1 Before You Begin
- 7.9 Technical Reference
- 7.10 Installing UPnP in Windows Example
- 7.11 Using UPnP in Windows XP Example
Static Route
- 8.1 Overview
  - 8.1.1 What You Can Do in this Chapter
- 8.2 Configuring Static Route
  - 8.2.1 Add/Edit Static Route
- 8.3 IPv6 Static Route
  - 8.3.1 IPv6 Static Route Edit
Quality of Service (QoS)
- 9.1 Overview
  - 9.1.1 What You Can Do in this Chapter
  - 9.1.2 What You Need to Know
- 9.2 The QoS General Screen
- 9.3 The Queue Setup Screen
  - 9.3.1 Edit a QoS Queue
- 9.4 The Class Setup Screen
  - 9.4.1 Add/Edit QoS Class
- 9.5 The QoS Policer Setup Screen
  - 9.5.1 Add/Edit a QoS Policer
- 9.6 The QoS Game List Screen
- 9.7 QoS Technical Reference
  - 9.7.1 DiffServ
Network Address Translation (NAT)
- 10.1 Overview
  - 10.1.1 What You Can Do in this Chapter
  - 10.1.2 What You Need To Know
- 10.2 The General Screen
- 10.3 The Port Forwarding Screen
  - 10.3.1 The Port Forwarding Screen
  - 10.3.2 The Port Forwarding Add/Edit Screen
- 10.4 The DMZ Screen
- 10.5 The ALG Screen
- 10.6 Technical Reference
Port Binding
- 11.1 Overview
- 11.2 The Port Binding Screen
  - 11.2.1 Port Binding Summary Screen
  - 11.2.2 The Any Port Any Service Edit Screen
Dynamic DNS
- 12.1 Overview
  - 12.1.1 What You Need To Know
- 12.2 The Dynamic DNS Screen
Filter
- 13.1 Overview
  - 13.1.1 What You Can Do in the Filter Screens
- 13.2 The IP/MAC Filter Screen
- 13.3 The IPv6/MAC Filter Screen
Firewall
- 14.1 Overview
  - 14.1.1 What You Can Do in the Firewall Screens
  - 14.1.2 What You Need to Know About Firewall
- 14.2 Firewall General Screen
- 14.3 Default Action Screen
- 14.4 Rules Screen
- 14.5 DoS Screen
  - 14.5.1 The DoS Advanced Screen
  - 14.5.2 Configuring Firewall Thresholds
- 14.6 Firewall Technical Reference
Parental Control
- 15.1 Overview
- 15.2 The Parental Control Screen
  - 15.2.1 Add/Edit a Parental Control Rule
Certificates
- 16.1 Overview
- 16.2 Local Certificates
- 16.3 Trusted CA
- 16.4 Trusted CA Import
- 16.5 View Certificate
System Monitor
- 17.1 Overview
  - 17.1.1 What You Can Do in this Chapter
  - 17.1.2 What You Need To Know
- 17.2 The Log Screen
- 17.3 The WAN Traffic Status Screen
- 17.4 The LAN Traffic Status Screen
- 17.5 The NAT Traffic Status Screen
User Account
- 18.1 Overview
- 18.2 The User Account Screen
TR-069 Client
- 19.1 Overview
- 19.2 The TR-069 Client Screen
System
- 20.1 Overview
- 20.2 The System Screen
Time Setting
- 21.1 Overview
- 21.2 The Time Setting Screen
Log Setting
- 22.1 Overview
- 22.2 The Log Setting Screen
Firmware Upgrade
- 23.1 Overview
- 23.2 The Firmware Upgrade Screen
Backup/Restore
- 24.1 Overview
- 24.2 The Backup/Restore Screen
- 24.3 The Reboot Screen
Remote Management
- 25.1 Overview
  - 25.1.1 What You Can Do in the Remote Management Screens
  - 25.1.2 What You Need to Know About Remote Management
- 25.2 The WWW Screen
  - 25.2.1 Configuring the WWW Screen
- 25.3 Telnet Screen
- 25.4 FTP Screen
- 25.5 SNMP Screen
  - 25.5.1 Configuring SNMP
- 25.6 DNS Screen
- 25.7 ICMP Screen
- 25.8 SSH Screen
  - 25.8.1 SSH Example
Diagnostic
- 26.1 Overview
  - 26.1.1 What You Can Do in the Diagnostic Screens
- 26.2 The Ping Screen
- 26.3 The DSL Line Screen
Troubleshooting
- 27.1 Overview
- 27.2 Power, Hardware Connections, and LEDs
- 27.3 Device Access and Login
- 27.4 Internet Access
- 27.5 Wireless Internet Access
- 27.6 USB Device Connection
- 27.7 UPnP
Legal Information

Chapter 6 Wireless 61

The following table describes the fields in this screen.

Table 15 Wireless >

More AP: Edit

LABEL DESCRIPTION

Wireless Network Setup

Wireless Select the Enable Wir

eless LAN check box to activate the wireless LAN.

Wireless Network Settings

Wireless Network

Name (SS

ID)

The SSID (Service Set IDentity) identifies the service set with which a wireless device

is associated. Wireless devices associating to the access point (AP) must have the

same SSID.

Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.

Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station

canno

t obtain the SSID through scanning using a site survey tool.

Client Isolation Select this to keep the wireless clients in this SSID fr

om communicating with each

other directly through the Device.

MBSSID/LAN

Isolatio

Select this to keep the wireless clients in this SSID from communicating with clients

in other SSIDs or wired LAN devices through the Device.

Select both C

lient Isolation and MBSSID/LAN Isolation to allow this SSID’s wireless

clients to only connect to the Internet through the Device.

Security Level

Security Mode Select B

asic (WEP) or More Secure (WPA2-PSK, WPA2) to add security on this

wireless network. Wireless clients must use the same wireless security settings as

the Device to connect to the wireless LAN. After you select to use security, additional

options appears in this screen.

Or you can select No Security to allow any client to connect to this network without

any data encryption or authentication.

See Section 6.2.1 on page 54 through Section 6.2.4 on page 57 for more details

about this field.

OK Click this to save your changes.

Cancel Click this to exit this screen without saving.

6.4 MAC Authentication Screen

Use this screen to configure the Device to give exclusive access to specific devices (Allow) or

exclude specific devices from accessing the Device (Deny). Every Ethernet device has a unique MAC

(Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs

of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses of

the devices to configure this screen.