User's Manual
Table Of Contents
- DSL-100HNU-T1 v3 User’s Guide
- Contents
- Introduction
- Introducing the Web Configurator
- Quick Start
- Connection Status and System Info
- WAN Setup
- Wireless
- Home Networking
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Port Binding
- Dynamic DNS
- Filter
- Firewall
- Parental Control
- Certificates
- System Monitor
- User Account
- TR-069 Client
- System
- Time Setting
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Remote Management
- Diagnostic
- Troubleshooting
- Legal Information
Chapter 6 Wireless 67
6.7 The WMM Screen
Use this screen to enable or disable Wi-Fi MultiMedia (WMM) wireless networks for multimedia
applications.
Click Network
Setting > Wireless > WMM. The following screen displays.
Figure 37 Network Setting
> Wireless > WMM
The following table describes the labels in this screen.
Table 19 Network
Setting > Wireless > WMM
LABEL DESCRIPTION
Enable WMM of
SS
ID1~4
This enables the Device to automatically give a service a priority level according to the
ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of
Service) gives high priority to voice and video, which makes them run more smoothly.
Apply Click App
ly to save your changes.
Cancel Click Ca
ncel to restore your previously saved settings.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 18 Network Setting > Wireless > WDS (continued)
LABEL DESCRIPTION