User's Manual

Chapter 7 Home Networking 83
The following table describes the labels in this screen.
Table 26 Network
Setting > Home Networking > Static DHCP
LABEL DESCRIPTION
Add new static
lease
Click this to add a new static DHCP entry.
# This is the index number of the entry.
Status This field displays whether the client is connected to the Device.
Host Name This field displays the client host name.
MAC Address The MAC (Media Access Control) or Ethernet addr
ess on a LAN (Local Area Network) is
unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that is
assigned
at the factory. This address follows an industry standard that ensures no
other adapter has a similar address.
IP Address This field displays the IP address r
elative to the # field listed above.
Reserve Select the check box in the heading row to autom
atically select all check boxes or select
individual entry check boxes in each entry to have the Device always assign the
selected entries's IP addresses to the corresponding MAC addresses and host names.
You can select up to 128 entries in this table.
Apply Click Apply to save your changes.
Cancel Click Ca
ncel to restore your previously saved settings.
Refresh Click Refr
esh to reload the DHCP table.
If you click Add new static lease in the Static DHCP screen, the following screen displays.
Figure 45
Static DHCP: Add